Alabaster
Alabaster panels mimic the natural appearance of bright alabaster stone.
This décor requires either an opaque or semi-opaque add-on to create the appearance of stone.
Ask your local Lumicor representative about a two-panel repeat for installing panels that will be aligned. Locate your rep and get started today!
Material Specifications
Resin Types & Sizes
Lumiclear Gauges:
- 1/8" .118" (3 mm)
- 5/32" .160" (4 mm)
- 3/16" .196" (5 mm)
- 1/4" .236" (6 mm)
- 3/8" .354" (9 mm)
- 1/2" .472" (12 mm)
Lumiform Gauges:
- 1/8" .118" (3 mm)
- 1/4" .236" (6 mm)
- 3/8" .354" (9 mm)
- 1/2" .472" (12 mm)
Available in panel sizes:
- Standard: 48" x 96" (1219 x 2438 mm)
Default Finishes
Matte/Matte Illume*
*This décor requires either an opaque or semi-opaque add-on to create the appearance of stone.
*This décor requires either an opaque or semi-opaque add-on to create the appearance of stone.
Compatible Add-Ons
Price Group
$$$$$
Pattern Repeat
NoDecor Direction
- Non-Directional
*Not all decors are available in every gauge or sheet size and may vary by resin. Gauge tolerance is ± 10%. Each color layer adds .010" to the thickness.
** Outside of the Wall Protection program a ten sheet minimum will apply for the .050" gauge.
Other Decors in Print
Add-Ons for Alabaster
ChemShield
A barrier used to increase the chemical resistance of Lumiclear panels.
Illume
Illume helps to spread light evenly across the panel and conceal bulbs and fixtures to create a clean aesthetic.
Marker Board
A high quality dry erase finish that can be added to any Lumicor panel.
Opaque
An available backing for Lumiclear or Lumiform resins that creates an opaque panel.
Luminous
Our proprietary color technology can be added to any standard Lumicor product, its versatility making it easy to add a splash of color to any décor.
Reflective Finishes
Reflective Finishes by Lumicor are proprietary reflective surfaces that can be applied to panels to add dimension and a sophisticated sparkle to any application.